Performance characteristics of shot blasting machine

Shot Blasting Machine can also remove surface contaminants from a partially coated surface and provide a surface profile that increases the adhesion of the coating to achieve the purpose of strengthening the The working principle is: Shot blasting machine is a kind of treatment technology which throws abrasives at high speed and impacts on the surface of cleaning item by turbine.

Compared to other surface treatment technologies, shot blasting machine is faster and more efficient, and it can be applied to the casting process after partial retention or stamping.

Hook pass through shot blasting machine:

Directly hung the treatment workpieces on the hook or hanger in front of the shot blasting machine, manually brought to the traction system at the front of the shot blasting chamber, and the hook will automatically enters the shot blasting chamber. After the hook enters the shot blasting chamber, the door of the shot blasting chamber is closed pneumatically and the electrical interlock is used to prevent others from opening the door of the shot blasting chamber by mistake when the items are being shot blasting in the shot blasting machine.

When the hook enters the shot blasting chamber, the hook can be moving back and forth in the set interval position while it auto rotated, so that the cleaning items are fully covered by throwing shots and reduce the throwing dead Angle.

Shot blasting machine can be designed with two or multiple hooks, while one hook operating in the shot blasting chamber, the loading and unloading can be done on the other hooks at the same time. The time of shot blasting can be adjusted arbitrarily. After the shot blasting machine stops operating, the chamber door is open to bring in and out the cleaning items. The dust produced in the shot blasting process is filtered and discharged by the double-stage dust collector.

Crawler shot blasting machine:

Load the cleaning items on the crawler belt in the shot blasting chamber, the operator presses the "Start" button, the shot blasting chamber door is closed manually or pneumatically, shot blasting cleaning begins, the crawler belt runs forward, and the cleaning items are constantly rolling inside the shot blasting chamber. At the same time, the turbines throws the abrasives at high speed onto the surface of the rolling items, and the cleaning items can be cleaned completely and evenly. The abrasives flow into the screw conveyor through the chute on the track, and then the abrasives are transported to the bucket elevator, and then lifted to the separator by the bucket elevator, which is separated and stored for use.