Why does the turbine blade surface appears groove-like wear？

The inner and outer end of the blade can be changed to use the part of the blade with a small degree of wear as a throwing area, and in the subsequent maintenance, the blade can be turned over only, so that the blade can be used again. In this way, each blade can be used four times under uniform wear, after which the old blade is replaced.

Introduce the Shot Blasting Machine blade replacement methods and skills, when replacing the old blade, a whole set of evenly weighted blades should be replaced at the same time. The blade of the shot blasting machine is checked before leaving the factory to ensure that the blade has the same weight and the weight error of each blade belonging to the same set of packaging does not exceed 5 grams. It is not advisable to replace blades with different sets, because blades with different sets cannot guarantee the same weight.

Start the shot blasting machine to idle, that is, which is means shot blasting operation without abrasives, and then stop, pay attention to the machine noise during this process.

What are the precautions in the transportation process of shot blasting machine spare parts:

When selecting the mode of transportation, choose the direct delivery according to the customer's location, reduce the loading and unloading times of the shot blasting machine spare parts, and avoid breaking during loading and unloading.