Shot Blasting Peening Equipment

Xinke preservation line is a highly complex, individually configured surface treatment system that fully automatically pre-heats, derusts, and descales and then applies a temporary corrosion protection – the welding primer – to steel.

Its purpose is to improve the corrosion resistance and fatigue resistance of the steel plate, extend the service life, and optimize the surface state of the steel plate to facilitate subsequent processing.

Preservation lines can take on enormous dimensions, a complete preservation line that can be easily integrated seamlessly into a customized production line, this ensures a flexible production process and a high material output.

Roller conveyor lines are an essential part of the overall preservation system. The components (steel plate, steel pipe or steel section) continuously pass through the pre-treatment chamber, the blasting chamber and the cleaning chamber, on a special roller conveyor. The high performance turbines mounted on the blasting chamber ensure full coverage under controlled process conditions, and result in the desired cleaning effect.

We are a professional steel plate surface treatment line manufacturer. Steel plates can be processed in widths ranging from 1m to 6m. It can also handle general structural steel, such as angle steel, channel steel, I-beam, etc.

Our through - type (pass - type) shot blasting machine is a top 10 universal industrial workhorse. Ideal for metal surface treatment, it features a continuous conveying system for seamless large - scale production. Multiple shot blasters in a 3D array ensure 360° non - dead - angle treatment of plates, castings, and more.

This machine efficiently removes rust, paint, and contaminants, while enhancing metal's mechanical properties by inducing compressive stresses.excels in removing rust, scale, old paint, and contaminants from plates, structural steel, castings, and forgings. Beyond cleaning, it simultaneously improves the metal's mechanical properties by inducing compressive stresses, which significantly enhances fatigue life and durability. Engineered for productivity, its continuous operation ensures maximum throughput with minimal manual handling. 

Equipped with a high - efficiency dust collection system (99.97% removal, 3mg/m³ emission), it meets environmental standards. The intelligent PLC control and modular design allow for easy operation and quick component replacement, achieving one - machine multi - purpose.  

Pass Through Type Shot Blasting Machine is an industrial system designed for the high-efficiency, continuous cleaning, descaling, or surface preparation of workpieces. Unlike batch-type machines, it processes components on a conveyor system, typically a rubber belt or roller conveyor, allowing them to pass through an enclosed blast chamber in a steady flow. This makes it ideal for high-volume production environments.

The primary application of through-type shot blasting machines is in heavy industries requiring continuous processing. They are extensively used for:  Cleaning structural steel sections, plates, and profiles before painting in construction and bridge projects.  Processing large volumes of automotive components like axles, springs, and forged parts.  Descaling and cleaning metal sheets, bars, and pipes in steel mills and pipe manufacturing plants.  Cleaning castings and forgings in foundries and forging operations to remove sand and scale.  Pre-treating railway components and wheelsets.  In summary, the through-type shot blasting machine is a cornerstone of modern industrial surface treatment, offering automated, efficient, and consistent preparation of metal surfaces for subsequent finishing, protection, or assembly processes.

A Pass-through Shot Blasting Machine is a continuous operation system designed for the high-efficiency cleaning and surface preparation of a wide range of components. As the name suggests, workpieces "pass through" a sealed chamber on a conveyor system, making it ideal for high-volume production lines and treating large, standardized items.

The core principle involves a centrifugal blast wheel. This wheel propels steel shot at high velocity onto the surfaces of the components passing through the enclosure. This abrasive impact effectively removes rust, mill scale, old paint, and contaminants. The machine incorporates a sophisticated recycling system that collects the used shot, separates the debris, and returns the clean abrasives to the wheel for reuse, ensuring a continuous and economical operation.

The primary advantage of this design is its unmatched efficiency and automation. Models like the Roller Conveyor Shot Blasting Machine allow for the effortless processing of long, heavy, or flat items such as H Beams, steel plates, and even alloy wheels. This eliminates slow, labor-intensive manual methods. The process is not only fast but also delivers a uniform surface profile, crucial for subsequent coating adhesion. Furthermore, the shot peening action imparts compressive stresses, enhancing the fatigue life of the treated parts.

In summary, from dedicated H Beam Shot Blasting Machines to versatile roller shot blasting machines, the pass-through design is a cornerstone of modern industrial manufacturing, offering a blend of speed, consistency, and automation for superior surface treatment.

Pass Type Shot Blasting Machine is an industrial workhorse designed for the continuous, high-volume cleaning and surface treatment of metal workpieces. Imagine a robust chamber where components pass through on a conveyor system while being bombarded by a high-velocity stream of abrasive media (shot). This process, known as shot blasting, efficiently and uniformly cleans, strengthens, and prepares metal surfaces in a single pass.

This machine excels in removing rust, scale, old paint, and contaminants from plates, structural steel, castings, and forgings. Beyond cleaning, it simultaneously improves the metal's mechanical properties by inducing compressive stresses, which significantly enhances fatigue life and durability. Engineered for productivity, its continuous operation ensures maximum throughput with minimal manual handling. 

It is indispensable across numerous sectors, including metal manufacturing, automotive, wind power, shipbuilding, and structural steel fabrication. Whether preparing I-beams for construction, cleaning train wheels, or descaling metal plates, this machine is a vital investment for achieving superior surface quality, extending product lifespan, and boosting overall manufacturing efficiency.
Upgrade your production line with our reliable passage-type shot blasting solutions today!

With the increase of the punishment for environmental pollution, pickling cleaning has been gradually eliminated by the market, and the opportunity of pass through type roller conveyor shot blasting machine has been applied in more and more industries. 

Pass through shot blasting machines are used in the casting industry, especially in the cast steel and cast iron industries.  In these industries, shot blasting machines are a very common consumer equipment, mainly used to clean the appearance of cast steel and cast iron, sand, scale and other impurities.  In the foundry industry, virtually all steel and cast iron parts are processed by shot blasting machines.  The purpose of this is not only to clean the outer impurities of the casting, but also to check the quality of the casting after the casting is completed. Products with bad appearance can be stopped directly.

Roller conveyor lines are an essential part of the overall preservation system. The components (steel plate, steel pipe or steel section) continuously pass through the pre-treatment chamber, the blasting chamber and the cleaning chamber, on a special roller conveyor. The high performance turbines mounted on the blasting chamber ensure full coverage under controlled process conditions, and result in the desired cleaning effect.

We are a professional steel plate surface treatment line manufacturer. Steel plates can be processed in widths ranging from 1m to 6m. It can also handle general structural steel, such as angle steel, channel steel, I-beam, etc.

Xinke offers a range of roller conveyor shot blasting machine from small simple machines to construction blasters, heavy duty machines and complete preservation lines.

It can be easily integrated into existing production lines.

The roller conveyor shot blasting machine is predominantly used to clean metal plates and profiles in a continuous through feed process. The size of the roller conveyor will be determined according to the size of the workpiece to be processed.

The roller pass shot blasting machine is easy to operate, just load the steel material onto the machine, press the start button, the workpieces pass through the shot blasting chamber on a roller conveyor. Depending on different workpiece, shot blasting is carried out with precisely positioned blast turbines. The blasting result is all-round, comprehensive, and always reproducible.

After a short cycle period, the system will automatically unload the treated material. The entire process is completed, and all dust and residual pellets are removed.

stainless steel strip shot blasting machine is a key surface treatment equipment. Its core working principle involves using high-speed rotating wheels to propel steel shots at a powerful, controlled velocity onto the stainless steel strip's surface. This dense, high-impact stream of abrasive media effectively removes all surface contaminants, such as scale, rust, and residues. Simultaneously, it creates a uniform microscopic anchor pattern on the metal, significantly increasing the surface area and roughness. This process, known as peening, also enhances the material's fatigue strength. The result is a perfectly clean, activated, and matte-finished surface, which is essential for optimal adhesion in subsequent coating, painting, or bonding processes, ensuring superior product quality and durability.

Xinke Steel Strip Shot Blasting Machines are specifically designed to used in hot rolling annealing pickling process for carbon steel, alloy steel, or stainless steel strips, the purpose of this design is to remove the oxide skin from the stripe surface. The addition of its function can greatly improve the pickling efficiency, reduce acid consumption, by optimizing the amount of shot blasting machine, can obtain the best descaling efficiency and descaling effect.

The Steel Strip Shot Blasting Machines are customized for narrow steel belt (650~800mm), medium steel belt (800~1600mm) and wide steel belt (1750~2400mm) according to the needs of users. Shot blasting system can be adjusted to fit specification.The adjustment will be made by regulating the abrasive throughput rate, by varying the abrasive throwing speed or the breadth of abrasive impingement.The shot blasting process improves the surface roughness and cleanliness, which is crucial for subsequent coating or painting processes.

Stainless steel strip shot blasting machines are specialized equipment designed for the surface treatment of stainless steel strips. These machines are essential in industries where the quality and durability of stainless steel surfaces are critical, such as in automotive, construction, and appliance manufacturing. The primary function of these machines is to clean, strengthen, and prepare the surface of stainless steel strips for further processing or coating.By removing surface imperfections and contaminants, the shot blasting process enhances the corrosion resistance and overall durability of the stainless steel strips.These machines are designed for high-throughput operations, making them suitable for large-scale industrial applications.

Xinke Steel Strip Shot Blasting Machines are specifically designed to used in hot rolling annealing pickling process for carbon steel, alloy steel, or stainless steel strips, the purpose of this design is to remove the oxide skin from the stripe surface. The addition of its function can greatly improve the pickling efficiency, reduce acid consumption, by optimizing the amount of shot blasting machine, can obtain the best descaling efficiency and descaling effect.

The Steel Strip Shot Blasting Machines are customized for narrow steel belt (650~800mm), medium steel belt (800~1600mm) and wide steel belt (1750~2400mm) according to the needs of users. Shot blasting system can be adjusted to fit specification.The adjustment will be made by regulating the abrasive throughput rate, by varying the abrasive throwing speed or the breadth of abrasive impingement.The shot blasting process improves the surface roughness and cleanliness, which is crucial for subsequent coating or painting processes.

Xinke Steel Strip Shot Blasting Machines are specifically designed to used in hot rolling annealing pickling process for carbon steel, alloy steel, or stainless steel strips, the purpose of this design is to remove the oxide skin from the stripe surface. The addition of its function can greatly improve the pickling efficiency, reduce acid consumption, by optimizing the amount of shot blasting machine, can obtain the best descaling efficiency and descaling effect.

The Steel Strip Shot Blasting Machines are specifically designed to used in hot rolling annealing pickling process for carbon steel, alloy steel, or stainless steel strips. It is to remove the oxide skin from the stripe surface. It is an indispensable equipment for hot strip steel production line. All branches of steel producing and manufacturing industries use surface finishing processes. Semi-finished or finished products must be free from rust, scale or contaminants for any subsequent operation.